I would like to test the #ribbit #digimode protocol on HF 18.103 and 14.071 MHz USB.
Any candidates ?

Use Rattlegram app on your smartphone. Acoustic coupling with your transceiver would do the job (your smartphone between your speaker and the mic)

https://ribbitradio.org

Probably going to try some #digimode #hamradio on #20m around UTC 0200 from Chicagoland, hoping for my first K2K conversation. Will be trying Olivia again, maybe JS8. Let me know what mode I should find you on if you'll be listening tonight!

A brief #introduction: Looking for #HamRadio community as I explore digital modes and other things suited to portable/QRP operation. Anyone in North America up for a #20m #Olivia #digimode sked?

@wireinatree I think there will be some candidates on mastodon.radio

#digimode #olivia #20m

Tried again, unsuccessfully, to get #FT8 to work on my #FT857 without sound coming from the speaker. Turning the volume down kills audio from the data port, as does unplugging the speaker. My audio interface, which worked fine with dataport audio, doesn't work with the external speaker jack... even though it works with an external speaker. Out of ideas. #digimode #digimodes

I've got a XggComms cable to connect my FT-891 to my Android phone. I should be QRV for #PSK31 #digimode during field operation.

DIN to transceiver and audio jacks to phone (with a Y). Transceiver in VOX mode.

FT-Cable-7-ISO
http://www.xggcomms.com/Yaesu-Interface-Shop(2066629).html

@k2za @MW1CFN For the IC-705, yes: https://roskosch.de/sdr-control-ios/ from DL8MRE. I mostly listen on my 705 (yeah, I know, "get with it, Peter") but it will do FT8, 'phone, and I believe CW.

It also supports the IC-7610 and 9700 explicitly, though via their LAN connection (705 has Wi-Fi).

So if you have any of those radios, you're good! :-D

#hamr #digimode #iPad

@kelvin0mql @k2za @AE4WX @KI5SMN @bud_t @KC8JC

"Thread" here is fraught with expectations that may not be met ... Regardless, the only time you'd need sub-second time accuracy in the field is if U are doing a #digimode from the #WSJT suite (RTTY & other legacy data modes don't care) so U have *some* sort of computer & if U don't have TCP/IP, you can always pull from the sky. Looks like a GPS dongle is only about US$35 (probably less - that was in the first 5 google responses).

@MW1CFN For any hams interested in using the 6-pin mini-DIN on their radio -- it wasn't only Icom that had them -- this is the best resource (IMHO)

http://wa8lmf.net/6-Pin-MiniDin-Data-Connector/

#hamr #digimode #DATAport #miniDIN

It is possible to use a transverter with #wsjtx and get right frequencies in logs and clusters.

In menu File > Settings > Frequencies, you can add an offset for a band with a right click in station information panel

#digimode #ft8 #2m

@N2DYI Not a thing I knew about - thanks!

https://kitsforhams.com/dinah

#hamr #digimode #buildakit

My setup seems to work in #digimode

💻 Raspberry Pi with wsjtx
:radio_base: FTdx10 about 50w
:radio_tower: EFHW (about 23m of wire and a coil near the end for 40m) sloping over the roof

When operating #digimode through VNC (I have a RPi in the shack), it is easy to adapt input audio level to get a good signal in the software.
But it is more difficult to see if your output audio level is correct when you don't see the powermeter of the rig.

I have the bad (or good) habit to let the rig power limit to 90W (of 100w) and to adapt the audio level to set power of the signal.

1/2

Played with #fldigi today for the first time and made my 1st QSO using #olivia. So many things to do in #amateurRadio …

#digiMode

So aside from #FT8, which #digimode is best for #DX? All of my contacts on other modes have been relatively local.

I think tomorrow I'm going to experiment with #THOR #digimode on 20m at around 1800 UTC.

If you want to test #Olivia #Digimode I'm QRV on 14071+1.5 kHz in 8/250 mode

#CQCQCQ

:radio_tower: Special Event Weekend !

THE 1ST EVER OLIVIA DIGITAL MODE WEEKEND QSO PARTY!

From 2023-02-11 14:00z
to 2023-02-13 02:00z

https://groups.io/g/olivia

#Olivia #MFSK #Digimode
not #FT8 nor #PSK31

Monitoring VDL2 this evening using #MultiPSK and a RTL-SDR V3. Frequency is 136.775 MHz.

#vdl2 #acars #digimode

Taking part in this evening's RSGB #432MHz #FT8 #AC #data #contest #digimode #WSJTX #amateurradio #amateurradiooperator #hamradiooperator #hamradio #ic9700 #UHF #70CM #icomuk