@lzg Except for this project, which removes noise from #amateurradio transmissions.
https://ournetplace.com/rm-noise/ #hamradio #hf #cw #ssb #fm
#AmateurRadio #HamRadio #HF #cw #ssb #fm
A multiband #HF antenna I am considering for my home station is an off-center fed #dipole. My visceral reaction to a commercial option for one was "OK, but I know enough so far that I think I could build the same thing out of better materials for half the price."
However, being an antenna neophyte, I was also wondering if I could use a balanced feedline instead of coax. And then I found this great discussion by VE2DPE: https://www.hamradiosecrets.com/off-center-fed-dipole.html #HamRadio
20 Meters ~23:38 to 23:45 UTC
(Busy band!)
- Unidentified station from Montana, USA
- KQ4EFU (unclear if they were TX station or if TX was making QSO with them)
- KC4BB (AL, USA)
- KE8?? (Michigan, USA)
- KF0JYF (N MN, USA)
- N0XMD (OH, USA)
- KT4Q POTA (NC, USA)
- XE1A (Mexico!)
Vast improvement over the planar disc antenna for HF, I'd say. #HamRadio #SWL #HF #NorcalDoublet #Xiegug90 #RX
#HamRadio #swl #HF #norcaldoublet #xiegug90 #rx
Hey fabulous operators in the northern mid -atitudes: how do you set up your HF wire antennas so that they don’t collapse in this kind of heavy, late season wet #Snow? Pretty sure that the million-year long era of dry, white, fluffy snow in New England is over.
(I don’t have any antennas up yet, but it’s something I want to prepare for)
WW0CJ/M7WCJ/ZF2CJ reporting in.
University student studying electrical engineering.
Radio(-adjacent) interests include #HF, #Contesting, #POTA, #3dPrinting, #DXCC, #QRP, #KitBuilding, and a ton more.
I post non-radio stuff @roguefoam - and more hobby stuff on Instagram @roguefoam574. Formerly on mastodon.radio, that account will be "defunct" for now.
Would love to chat about anything radio/electronics/hobby related!
#introduction #HF #contesting #pota #3dprinting #DXCC #qrp #kitbuilding
Update: This bag isn't quite big enough for the radio + a 6ah Bioenno battery / shack-in-a-compact bag setup I'm aiming for with the #XieguG90; it's a tight fit and I worry about the battery and other bits getting bashed around while in my backpack.
But I think I have found a cheap but well-constructed replacement after obsessively looking at bags online for a week. Will post photos of the new one when I get it and if it works. Stay tuned... #HamRadio #HF #SOTA #POTA
#xiegug90 #HamRadio #HF #SOTA #pota
#HamRadio #HF #AmateurRadio #Antenna
PSA/QST Ice has a real effect on your antenna’s tune.
#HamRadio #HF #AmateurRadio #antenna
Well, I *WAS* going to go and finish working on my #mobile #HF installation, but, then #MotherNature decided to #dump this #FourLetterWord all over the ground, and I don't have a garage. I am LeSad.
#mobile #HF #mothernature #dump #fourletterword
TY everyone for the portable #HF rig advice! For #XieguG90 folks: what are your favorite #PowerSupply options for 20 & 10W? Both for #SOTA & AC--> DC for a home station? I realize this rig will be a 🚢⚓️ for SOTA but am trying to keep it as light as reasonable.
Trying to research it, & have some ideas (i.e., BioEnno) but am overwhelmed w/ the options + considerations. E.g.: CW vs. SSB can bake a switching power supply if one isn't careful in choosing?. #HamRadio #NewHam
#HF #xiegug90 #powersupply #SOTA #HamRadio #newham
So if you were a shiny new ham, which would you choose as your 1st portable #HF rig for #SOTA/#POTA? The venerable #YaesuFT817 or the #XieguG90?
Heavily leaning towards the G90 but try to convince me why I’d want to choose the 817 instead.
Arguments based solely on country of origin will get you blocked with a swiftness.
#HF #SOTA #yaesuft817 #xiegug90 #HamRadio
Fascinating. Now that I am using higher quality coax (RG8U) for my feed line, my 16” #planardisc antenna very much outperforms MLA-30+ on #rx down to 160m w/r/t SNR and noise floor. It’s wild, especially given that it isn’t really supposed to perform a great on #HF with that disk size.
Picked up 24” piece of scrap sheet steel from the dump. As soon as I find another 24 inch piece of sheet metal, going to build another planar disc see if it performs even better in HF.
#planardisc #rx #HF #HamRadio #antenna
What low-cost pocket #HF rig would folks recommend to a new ham with a general license for #SSB & #CW on #SOTA/#POTA? I was looking at #(tr)uSDX / #truSDX as an option but some folks say, that while it is delightful rig, it might be rather frustrating for a new ham. Would love an #elecraftkx2 but it will take quite a while for me to save up for one. I plan on portable #EFHW or dipole variations for antennas. #HamRadio
#HF #ssb #cw #SOTA #truSDX #elecraftkx2 #efhw #HamRadio