Finally getting around to installing #Octopi on a second #rPi to put on my #SidewinderX2
Seems it doesn't want to share info with #Octoprint
Firmware version is 3.2.6

"Your printer's firmware supports host action commands, but they are disabled. The firmware will not inform OctoPrint about job pause & cancellations, filament runouts, and similar firmware-side events. If you want this functionality, you need to change your firmware's configuration."

#3DPrinting

Finally getting around to installing #Octopi on a second #rPi to put on my #SidewinderX2
Seems it doesn't want to share info with #Octoprint
Firmware version is 3.2.6

"Your printer's firmware supports host action commands, but they are disabled. The firmware will not inform OctoPrint about job pause & cancellations, filament runouts, and similar firmware-side events. If you want this functionality, you need to change your firmware's configuration."

That Z wobble on the Artillery Sidewinder X2 is rather prominent Though this was an extreme example being a tall 398mm and narrow print I think a more substantive print with a sizeable base in both X and Y that doesn't narrow much in the Z axis might not have as noticeable layer misalignment

#3Dprinting
#SidewinderX2

SidewinderX2: Ma nouvelle imprimante 3D COUP DE COEUR ?! 💙 - https://www.youtube.com/watch?v=CRhwuTe_1KA

#SidewinderX2 #impression3d #test