I just got my first #ArgonOne case base for an #NVME M.2 drive , and discovered it's got multiple times the performance my old Argon One case #SATA drive bases.
It's like the bases for SATA drives are only USB 2 speed even though they plug into USB 3 ports.
Anyone else notice behavior?
Swapped out my #ArgonOne case for a new #DeskPi case. All to get the #Pi4 shutting down cleanly with my #UPS but booting back up when all is OK again.
With default Pi passthrough power the unit would not stay down. So I tried to use a #SwitchBot but there was not enough space to install it on the AgonOne. Fortunately OK on the DeskPi. The only issue was that the DeskPi install on Ubuntu did not work correctly!! A simple recompile and it worked a treat. Next step to join the dots ...!!
#argonone #deskpi #pi4 #ups #SwitchBot
Looking for an M.2 SATA drive to go with the Argon One M.2 expansion board.
Has to be SATA and not NVMe :|
Amazing how difficult it is to find listings on Amazon that are actually SATA and not NVMe.
I'm not sure of the brands of the ones I have found.
Does anybody have an brand recommendations for M.2 SATA drives?
#m2 #sata #argonone #raspberrypi
Well I have been putting all this together to take over the roll of what current #RPi3B+ so to that can be used with #AllStar node.
The only way could get #RPi4B was buying it in a kit, but turns out the #ArgonOne is rather nice case with expansion board. It will take over and have a pressure breakout connected to the GPIO and a USB #RTLSDR dongle attached to receive data via #RTL_433 from the WX outdoor unit.
#rtl_433 #rtlsdr #argonone #rpi4b #allstar #rpi3b
I blogged again - this time about fixing a software problem with the Argon One Raspberry Pi case when using #LibreElec.
#blog #raspberrypi #argonone #argon40 #argonforty
https://www.fossilvents.com/argon-one-v2-case-fan-control-with-libreelec-10/
#argonforty #argon40 #argonone #raspberrypi #blog #libreelec
Schade:
LibreELEC:~ # curl https://download.argon40.com/argon1.sh | bash
bash: syntax error: unexpected "(" (expecting "fi")
curl: (23) Failed writing body (155 != 908)
... und wie installiere ich nun das Script fรผr PowerButton und FanControl? ๐ค #argonone
Hab mir das Script kurz angeschaut - kann es sein, dass es sich nur auf richtigen Desktops (Raspbian & Ubuntu) installieren lรคsst? ๐คZumindest kommen Abfragen bzgl. diesen Desktops vor, ansonsten sieht es sehr nach Terminalausgaben aus.
#followerpower ๐ ๐
RT @NotEnoughTECH@twitter.com
Just look at that! Probably the cleanest @Raspberry_Pi@twitter.com desktop you could ever run! A closer look & benchmarks at #ArgonONE case by @argon_forty@twitter.com for #RaspberryPi4 #review
https://notenoughtech.com/raspberry-pi/argon-one/
๐ฆ๐: https://twitter.com/NotEnoughTECH/status/1265256088447975429
#argonone #raspberrypi4 #review