I think I finally dialed in some ok settings for printing minis on the new #bambu #p1p. I also ordered four more kg of PLA and PETG to continue prototyping some stuff I'm interested in, which I'm modelling from scratch and teaching myself CAD to do so. Fun!

Here's how Bambu will fix its 3D printers that began printing by themselves
https://www.theverge.com/23837180/bambu-rogue-3d-printers-fix-cloud-outage

>Bambu is rolling out a number of changes to help prevent its 3D printers from going rogue again.

Das sind aber schon eine Menge an Fixes, zu Problemen, die vorher überhaupt nicht bedacht waren. Diese Cloud-Abhängigkeit ist nicht gut in diesem Segment.

#3dprinting #3ddruck #bambu

Kleines Upsi bei #BambuLabs - deren #3DDrucker #Bambu X1C/P1P sind mit einer closed Firmware ausgestattet und hängen in der #Cloud. Ich denke den meisten meiner Follower sollten einige Antworten auf "what could go wrong" einfallen. Nunja -es gab einen Cloud-Fuckup, als Folge haben viele Drucker einfach angefangen zu drucken. Einige fanden mehr oder weniger gelungene Ausdrucke, andere ihren Drucker in Trümmern – hat ja keiner mit gerechnet und ggf. Druckrum nicht frei.

https://www.reddit.com/r/3Dprinting/comments/15sfisq/bambulab_bug_causes_printers_to_start_printing_in/

_Dang_ this is... legitimately dangerous.

Bambu X1C and P1P started printing while owners were asleep

https://www.theverge.com/2023/8/16/23064592/bambu-print-asleep-cloud-outage

#3dPrinting #Proprietary #ClosedSource #CloudComputing #Bambu

🎨 Multi-material 3D printing, the future is here!

🚀 Let's dive into the current solutions, shall we? Some hail #Bambu as innovative, while others believe the game-changer is #AMS, though it's criticized for being wasteful and unsustainable. #Prusa's #MMU had mixed reviews, but resourceful tinkerers made it work. For #Vorons, the #EnragedRabit seems to be the key to staying competitive. But wait, there could be other solutions out there! What are your thoughts?

Share your opinions on the thrilling world of multi-material 3D printing! 🗳️🎉

#3DPrinting #InnovationStation #TinkerersUnite #FutureTech 🎨🏭

Bought some multicolor filament for the #Bambu Labs #P1P and printing a cat toy for the shelter I volunteer at. Loving how it looks so far into the print!

#Bambu! We didn't forget about you! Are you a speedster but didn't want to build a #Voron? How are you liking it? Share your Bambu setup below!

#3dprinting

I recently acquired a #3dprinter and I've got to say, it's an utter revelation having one of these in the house.

Between all the sites like printables.com and thingiverse.com there's more stuff to print than I could manage in a lifetime. I've also been learning some basic #3dmodeling with OnShape so that I can create the few things I want that are too specific/niche to find on printables.com.

I can't believe I put off buying one of these for so long, I've had mine running practically 24/7 since i got it, I can't remember the last purchase I made that really made me thing "we're in the future now".

My wife loves it too, and now browses STL sites throughout the day and sends me stuff she wants printed

#3dprinting #3dprinted #bambu #p1p #maker #diy

BambuLab HEPA Carbon Filter (compatible with Alveo 3D filter) by INSIDE EDITON

Are you aware of the VOCs that 3D printing releases? Do you have adequate ventilation for your printer, a commercial filtration solution, or did you build your own? Check out this neat design.

Share your makes or own personal creations!

https://www.printables.com/model/528660-bambulab-hepa-carbon-filter-compatible-with-alveo-

#Prusa #Printables #Bambu #BambuLabs #X1C #P1P #P1S #DIY #3dprinting

Identifying a real-life problem (keep losing vape pods when I’m out), then designing a solution in CAD for #3Dprinting to fix that issue is _so_ interesting, and I get to learn more #Fusion360 as I go.

The “final” product is printed on a #Bambu P1P with AMS, & uses neodymium magnets to secure and give a really satisfying click as it snaps together.

Designed so it’s print-in-place, & when it’s closed it has the nice texture from the PEI sheet embedded on the outside.

https://youtube.com/shorts/rcgMO-K7FRM

If I didn't print primarily with ABS, I would ratger buy the #Bambu #P1P, just for those beautiful side panels people are making. I just love to make my printer my own and customize it.

But otherwise, the #P1S is a great upgrade, and nothing comes close to the #AMS commercially or #opensource.

My only hope is for the #EnrageRabbit MMU to take off or that the #Prusa MMU3 is a success, but we still haven't heard anything about it.

@3dprinting #3dprinting

@freeformz

These people are just being sore losers for not scoring.

Anyway, this is the 3D printing industry, even the manufacturers don't know a week before their machine will be released😂. People can wait years for a #Prusa but bitch over #Bambu.

@3dprinting #3dprinting

This looks like an interesting concept. It is about time the #opensource community starts catching up with #Bambu to rival the #AMS. This may just be the start. Although this makes me think of the #pallet rather than the AMS's cutting mechanism

Printables.com: AUTO FILAMENT SPLICER (AFS V1) USING YOUR 3D BOWDEN PRINTER (e.g. Ender 3/PRO) by Botcan3D

https://www.printables.com/model/524622-auto-filament-splicer-afs-v1-using-your-3d-bowden-

@3dprinting #3dprinting

@LordofCandy @koz

I would love to see someone take the #Bambu #AMS and jailbreak it to work with something like a #Voron, because let's be honest the #EnrageRabit MMU is just a tad of an improvement of the #Prusa #MMU.

@3dprinting #3dprinting

@koz

But then again, this input-shaping is calibrated based on the stock model. If I were to change my hotend, replace the fan with a ligher or heavier one. Or use some type of nozzle that has more mass, the calibration would be off?

If you use the rule of thumb often shared on r/3dprintng on #Reddit. You should rerun input-shaping calibration every time you change something that moves on the printer. Then their "one-size-fits-all" solution is just stupid.

They are trying to take an Apple approach and make 3D printing more accessible and simpler for non-technical people by eliminating this component.

But look at #Bambu. They have some of the most user-friendly printers, and they still have calibration with an accelerometer.

@3dprinting #3dprinting

@koz

I think it is all due to the "Stae of #opensource in #3dprinting" by Josef #Prusa that led to this.

We have 3 routes we can take now. #Closedsource #Bambu printers, semi-open #Creality (which is just a copy of everything out their basically), and #Opensource #Voron.

I am disappointed in Creality just becoming copy-cats and also releasing stupid stuff like the Creality #SonicPad and locking it up as much as the #FLSun 400 controller.

But companies like #AnyCubic aren't even trying to copy #Prusa. They are just cntrl+f'ing them by now.

@3dprinting #3dprinting

@koz

It actually comes down to quality control and reputation. Every time I look at an #Apple #iPhone or #Mac, I think: damn that looks great, and it is so attractive. Also, users alway enjoy their experience.

Looking at all these #Linux subsytems and #Android setups, I sometimes look at an Android phone and think: WTF is going on here?

By limiting the user to always have a product that can still advertise itself and carry the promised quality through to word-of-mouth of other viewrs and users, you build a reputation.

Similar to #Bambu.

A good example is to look at the mod-ability of the #Ender3 and then search for it on #Reddit and r/3dprinting. It is the printer with the most problem. While r/prusa and r/bambu are just full of praise.

The opposite is, of course, true for the #Creality #K1, where they just delivered a shitty and broken system-locked printer.

@3dprinting #3dprinting

@koz

"To flash your own (or a community-made) unsigned firmware, you’ll have to break the appendix on the logic board (called the Buddy board) and move the jumper in a correct position. Breaking the appendix on the Buddy board is irreversible and voids the warranty of your printer’s electronics."

Sounds a lot like those encryption boards you get. Whick I think #Bambu went crazy with, but tehirs are part of the #PCB, so it is more difficult to bypass it. I am quite surprised that not a lot of people have just removed the hardware from the #X1C and just installed #Klipper.

Probably because then you lose the beautiful touch display and wase of use of the #AMS. Although Klipper has many good color changers.

@3dprinting #3dprinting

It's a #ween kind of day. #3dprinting #x1c #bambu

@fabbaloo

If there is one IDEX machine I want, it's the #SnapMaker. I just feel they are even more isolative and less-opensource than #Bambu