Not much visible really, but for the 4.60 it cost including shipping, am happy with this orange cassette locking screw









#cyclinglife #cycling #carbonda #aliexpress #sensahempirepro #kmc #obsidianflame #halifaxcycling #bikebuild

Last updated 2 years ago

Every built from scratch bike needs custom coloured disc brake bolts.... And a name..

I present to you... Obsidian Flame.









#cyclinglife #cycling #carbonda #aliexpress #sensahempirepro #kmc #obsidianflame #halifaxcycling #bikebuild

Last updated 2 years ago

There's lots I'd redo, and perhaps I will another time. Many mistakes were made, the rear brake housing should probably have come around the fork, the bar tape is icky, the caps HAVE to be replaced, etc, etc. But you know what? I'm pretty proud. Everything is working. And it's not going to be a daily ride anyway. I may strip it all and install hydraulic next fall, and take what I've learned and do better.







#bikebuild #carbonda #learningasigo #cycling #sensahempirepro #jagwire #kmc

Last updated 2 years ago

An bike, with an chain and an cat!

Final derailleur adjustments, brake adjustments, tightening and bar tape to go!







#bikebuild #carbonda #learningasigo #cycling #sensahempirepro #jagwire #kmc

Last updated 2 years ago

Last thing for today. Rear derailleur installed, not torqued down yet, and trying to figure out how to measure a chain. Will cut and install it tomorrow I think.







#bikebuild #carbonda #learningasigo #cycling #sensahempirepro #jagwire #kmc

Last updated 2 years ago

With a lot of help from my brother, shift housing has been run.






#bikebuild #carbonda #learningasigo #cycling #sensahempirepro #jagwire

Last updated 2 years ago

First vacation day task done. Handlebars "permanently" attached. Later I hope to run the shift housing and maybe install bottom bracket.






#bikebuild #carbonda #learningasigo #cycling #sensahempirepro #jagwire

Last updated 2 years ago

I had an amazon gift card, so bought a cable housing cutter. Will wait for it to arrive to do much else with the bike build. The one cut I did with a hacksaw was pretty icky. And I need a couple shorter bolts for one brake caliper.

#bikebuild

Last updated 2 years ago

So now that I know all that I think I can safely attach the bars more permanently and add a touch of grease around the bearings

#bikebuild

Last updated 2 years ago

Tried running the front brake housing through the handlebars, and got it through, but the cable wont take the angles, and even if it did, not sure it would work.

Perhaps it'd work with hydraulic, but even still not sure how people run gear cables through with those angles?

In any event, I'll go more traditional, and figure out a way to attach the housing to the fork.

#bikebuild

Last updated 2 years ago

Roughly positioning the shifters to start measuring cable housing.





#bikebuild #carbonda #learningasigo #cycling #sensahempirepro

Last updated 2 years ago

Wheels. Try to install cable routing this weekend perhaps. Everything is only temporarily in place now. Can't lock the handlebars down till I've run the cables and still undecided if I want to buy the L-twoo hydraulic system.




#bikebuild #carbonda #learningasigo #cycling

Last updated 2 years ago

Temporary handlebar and fork placement before cutting the head tube. Need to get a hacksaw this week to do that I guess.




#bikebuild #carbonda #learningasigo #cycling

Last updated 2 years ago

On this bitterly cold day, I decided to finally start assembling the bike parts I've been gathering from AliExpress and Carbonda I'm sure the seat is nowhere near level, but will tweak that when it's on wheels. Don't worry, the carbon isn't clamped, just resting there.


#cycling #bikebuild

Last updated 2 years ago

Ashley Computer 🏳️‍🌈 · @ash
844 followers · 2970 posts · Server bne.social

New bike!

#bikebuild

Last updated 2 years ago

Ashley Computer 🏳️‍🌈 · @ash
758 followers · 2399 posts · Server bne.social

They've finished building the third (of four) buildings in my complex, so now I have access to a smol gym with two (2) rowing machines which I plan to make good use of now that my bike is broken 💪

#bikebuild

Last updated 2 years ago