JevidL (KE8DET) · @jevidl
140 followers · 394 posts · Server ono-sendai.jevidl.net

Picture of the WIP, but ready to test prototype . Despite what the camera perspective suggests, it's approximately 38" overall length without being extended.

The end goal is that it will work for 20m - 6m, mounted on a fiberglass mast.

#dipole #antenna #amateurradio #pota #hamradio #antennadiy #3dprinting

Last updated 1 year ago

Abraxas3d W5NYV · @abraxas3d
777 followers · 1821 posts · Server mastodon.radio

Progress on an antenna design. I'm doing a talk about it for . It's a shortened half-wave from a 1958 paper.

We are trying to finish up this prototype before hits.

#hilary #hurricane #rsgb #dipole #QSOToday #hf

Last updated 1 year ago

IT News · @itnewsbot
3625 followers · 270543 posts · Server schleuss.online

The Dipole Antenna Isn’t as Simple as it Appears - Dipole antennas are easy, right? Just follow the formula, cut two pieces of wire, ... - hackaday.com/2023/08/16/the-di

#vna #dipole #antenna #reactive #resistive #impedance #frequency #bandwidth #wavelength #radiohacks

Last updated 1 year ago

Alper · @alper
338 followers · 736 posts · Server mas.to

Dipoles?
Where we are going we don't need dipoles...

Today I learned a lot about . They are quite picky about some unknown things. A saved the day by letting me measuring before putting everything together.

#amateurfunk #hamradio #amateurradio #qrpp #randomwireantenna #dipole #qrp #nanoVNA #transformers #impadence

Last updated 1 year ago

Richard C · @g7eix
19 followers · 27 posts · Server mastodon.radio

A bit of sealer and some shellac and were ready.

#bgota #dipole #lasercut

Last updated 1 year ago

Johan | PD1JMB · @dynode
208 followers · 2742 posts · Server mas.to

Anyone knows what I need here? Folded from a 11 el. yagi, the balun that was on it is about 11.5 cm but my calculations say it is 23cm 🤔

#uhf #hamradio #70cm #dipole #balun

Last updated 1 year ago

James · @KI5FGS
44 followers · 43 posts · Server mastodon.radio

So I finally got a 10 meter in the air this evening just to see if I could hear anyone. Came across some cw and I maybe heard the last part of a but not really much going on. Mostly I was excited to see how my was I was happy with 2:1 across the band. I was surprised about how flat it was according to my little VNA. Anyway it was a enjoyable evening playing radio!

#swr #qso #dipole

Last updated 1 year ago

GeoJoeK / KC1SRI · @Geojoek
169 followers · 722 posts · Server mastodon.hams.social

What are folks' thoughts / resources / design considerations for an 80m OCF dipole that would be end supported (feedpoint would not supported and would have weight of 80+ feet of LMR400 coax pulling on it).

Hanging the thing would be made much simpler, and I could get it much higher, if I didn't have to support the center, but not supporting the center also complicates things, I imagine.

#HamRadio #dipole #antenna #hamr

Last updated 1 year ago

AI8W 🤖📡 · @AI8W
58 followers · 627 posts · Server mastodon.hams.social

is up.
I miscalculated something for 80 and 160... not sure what, but... at least 40 and up work (except for 12m.. no tune on 12m...)

#dipole

Last updated 1 year ago

AI6YR Ben · @ai6yr
746 followers · 1208 posts · Server mastodon.radio

Scrounged up another 4:1 balun to replace my PVC-and-scavenged-romex one, back on the air with the OCF ! I should probably build another of the PVC version. The failure point was all the PVC on the wire from the Romex had degraded.

#hamradio #antenna #dipole

Last updated 1 year ago

yeti · @yeti
84 followers · 169 posts · Server emacs.ch
Kelvin n0mql EN35ld · @kelvin0mql
117 followers · 1568 posts · Server mastodon.hams.social

Haven't stretched the out this far in a long while. But after that , the numbers are pretty low.

OK, fine. So here we are on on

#dipole #antenna #solarstorm #maxusablefrequency #js8call #40meters #HamRadio

Last updated 1 year ago

GeoJoeK / KC1SRI · @Geojoek
135 followers · 447 posts · Server mastodon.hams.social

Tuned my 10m after cleaning up the feed point and 1:1 choke. Pretty darn happy with these numbers, although I’d like that impedance at 28.350 MHz to be a smidge higher.

#dipole #HF #antennas

Last updated 1 year ago

Geojoek · @Geojoek
102 followers · 191 posts · Server mastodon.hams.social

A multiband antenna I am considering for my home station is an off-center fed . My visceral reaction to a commercial option for one was "OK, but I know enough so far that I think I could build the same thing out of better materials for half the price."

However, being an antenna neophyte, I was also wondering if I could use a balanced feedline instead of coax. And then I found this great discussion by VE2DPE: hamradiosecrets.com/off-center

#HF #dipole #HamRadio

Last updated 1 year ago

Jim · @N4JAW
627 followers · 468 posts · Server mastodon.radio

Its a beautiful day to hunt with & Trying to decide which way to use paddle. Both ways are doable & comfortable.

#cwop #cwops #ultraportapaddle #americanmorse #qrpradio #morsecode #qrp #hb1b #youkits #dipole #buddipole #ParksOnTheAir #pota

Last updated 1 year ago

Jim · @N4JAW
621 followers · 455 posts · Server mastodon.radio
Tony W6SFI · @w6sfi
53 followers · 192 posts · Server mastodon.radio

So after some time spent on the roof this afternoon with a multimeter and antenna analyzer, the misbehaving is still something of a mystery. Perhaps the elements and mechanical are playing havoc with it. It seems to be OK for 10, 15, and 20 meters but somewhat less so at 40. Maybe the traps/coils between the 20 and 40 meter segments are getting curmudgeonly. Raising one leg and fastening it to a tree instead of the house seems to have helped a little at least.

#fatigue #dipole

Last updated 1 year ago

AI6YR Ben · @ai6yr
646 followers · 638 posts · Server mastodon.radio

Now that I have a station working, do I build my own VHF eggbeater or try a "double cross " ?

#diy #satellite #satcom #hamradio #antenna #dipole #satnogs

Last updated 2 years ago

Tony W6SFI · @w6sfi
49 followers · 170 posts · Server mastodon.radio

Using a meant for use in my backyard is less than ideal, but the likes it a lot more than the or on my roof, at least when it comes to 10 meters. So we'll see if I can actually participate meaningfully in this evening's gathering on that band.

#dipole #hexbeam #transmatch #mobile #antenna #vertical

Last updated 2 years ago

Tony W6SFI · @w6sfi
49 followers · 168 posts · Server mastodon.radio

After some experimental review at 30ish watts, the 10 meter element on the needs some inspection, but the other bands seem to behave. On the , however, receive is fine but my just can’t cope on transmit. I hope that’s a problem and not an problem. Either way, I must ascend to the roof to see what’s what. Perhaps two weekends from now; next weekend is booked for already 😁

#operating #portable #antenna #feedline #transmatch #dipole #fan #multiband #trapped #hexbeam

Last updated 2 years ago