AVAILABLE NOW.

DIRTY DRONE DISTORTION - a doom drone stompbox (3rd batch)

This one is for heavy doom drone sounds, no matter if you run your stringed instruments (electric guitar/bass/etc) or a synth through it, the Dirty Drone Distortion will add 10 tons of weight to it. It is housed in a sturdy aluminum enclosure, hand-painted with ‘industry burnout’ camo patterns in black and silver. The circuit is a modded vintage SUNN MODEL T preamp based distortion with HIGH and LOW control and a build in duo-oscillator DIRTY DRONE section. MIX control blends the DRONES with the pedal’s input, before the distortion kicks in. But the machine can also be used as a stand alone drone synth, if you fancy. Each oscillator has a FREQUENCY control for and a WAVEFORM toggle-switch for TRIANGLE and SQUARE wave selection. The upper toggle has 3 positions, the middle position disables that oscillator, if a single non-overlaping waveform is desired. The third toggle engages the EXTREME DISTORTION mode when flipped to the right. (NOTE! this is not explained or shown in the 1st demo video, since i have changed this function after recording it.) The NORMAL DISTORTION (toggle left) results in the wonderfully saturated distortion this circuit is famous for. The right stomp-switch with indicator LED is the DRONE KILL switch, it engages or shuts down the oscillators completely for hands-free operation. The left stomp switch is the TRUE BYPASS with it’s own indicator LED (the LEDs are violet/UV and lime green, order my vary). VOLUME attenuates the global output level (BEWARE: the pedal is VERY loud!). Powered by 9V DC via a ‘boss-style’ 2.1mm DC socket (negative pin inside). Power supply not included. Handmade by GRM for Metsään.

Some demovideos can be found from youtube or the Metsään website.

https://metsn.tumblr.com/post/708974793317384192

#METSÄÄN #dirtydrone #dirtydronedistortion #thismachinekillsfascists #dronesynthesizer #dronepedal #dirtpedal #DirtyDrone #distortion
#distortionpedal #doomdrones
#doommetal #dronemetal #doomcore
#pedal #guitarpedal #fuzz #stompbox #noiseagainstfascism #noisenotmusic #anarxnoise

DIRTY DRONE DISTORTION - heavy tone controlled distortion with build in doom drone oscillators

DM for preorders. (185€+shipping) The last batches went rather fast. When i have done proper documentation, they will be also made available via METSÄÄN and other online shopping strip malls.

This one is for heavy doom drone sounds, no matter if you run your stringed instruments (electric guitar/bass/etc) or a synth through it, the Dirty Drone Distortion will add 10 tons. It is housed in a sturdy aluminum enclosure, hand-painted with ‘industry burnout’ camo patterns in black and silver. The circuit is a modded vintage SUNN MODEL T preamp based distortion with HIGH and LOW control and a build in duo-oscillator DIRTY DRONE section. MIX control blends the DRONES with the pedal’s input before the distortion kicks in. Each oscillator has a TUNE control and a WAVEFORM toggle-switch for TRIANGLE and SQUARE wave selection. The third toggle engages the EXTREME DISTORTION mode when flipped to the right. (NOTE! this is not explained or shown in the 1st demo video, since i have changed this function after recording it.) The NORMAL DISTORTION (toggle left) results the mighty saturated distortion this circuit is famous for. The right stomp-switch with indicator LED is the DRONE KILL switch, it engages or shuts down the oscillators completely for hands-free operation. The left stomp switch is the TRUE BYPASS with it’s own indicator LED (the LEDs are violet/UV and lime green, order my vary). VOLUME attenuates the global output level (BEWARE: the pedal is VERY loud!). Powered by 9V DC via a ‘boss-style’ 2.1mm DC socket (negative pin inside). Power supply not included. Handmade by GRM for Metsään.

#METSÄÄN #dirtydrone #dirtydronedistortion #thismachinekillsfascists #dronesynthesizer #dronepedal #dirtpedal #DirtyDrone #distortion
#distortionpedal #doomdrones
#doommetal #dronemetal #doomcore
#pedal #guitarpedal #fuzz #stompbox #noiseagainstfascism #noisenotmusic

The recording of COLDSORE's live-set at @noisetraffic in the @vapaantaiteentila bunker is now online over here:

https://totstellen-grmmsk.bandcamp.com/album/live-at-noise-traffic-23

GRM performed as COLDSORE with an array of their self build METSÄÄN MACHINES, namely the Musique Concrète Platform (bowed, plugged, stroked and scratched), Dirty Drone synth, ANAPHYLAXIS filter + some EHX pedals. Beware: This is the most 'dark ambient' recording of COLDSORE this far.

Before the instrumental set, GRM made a short rather abstract vocal intro about noise, traffic, communication, transparency, responsibility, disruption of deeply engraved patterns of social behavior and complicity.

And asked the audience to talk more about normalisation + disruption!

(unfortunately i failed to record that part.)

#ENDwhitesupremacy

The pictures are taken by @danielhakkaa, thank you. A big up to the organizers, other performers and audience.

#darkambient #musiqueconcrete #liverecording #metsään #coldsoresound #bunker #shelter #helsinki #underground #thismachinekillsfascists #dirtydrone #anaphylaxisfilter #noisemusic #noise #antifascistmusic #anarchXnoise

Available now.

DIRTY DRONE DISTORTION - Distortion with build in doom drone oscillators

Still need to make a demo video with the NORMAL distortion setting, as the previous one only shows the EXTREME setting. Stay detuned.

This one is for heavy doom drone sounds, no matter if you run your stringed instruments (electric guitar/bass/etc) or a synth through it, the Dirty Drone Distortion will add 10 tons. It is housed in a sturdy aluminum enclosure, hand-painted with ‘industry burnout’ camo patterns in black and silver. The circuit is a modded vintage SUNN MODEL T preamp based distortion with HIGH and LOW control and a build in duo-oscillator DIRTY DRONE section. MIX control blends the DRONES with the pedal’s input before the distortion kicks in. Each oscillator has a TUNE control and a WAVEFORM toggle-switch for TRIANGLE and SQUARE wave selection. The third toggle engages the EXTREME DISTORTION mode when flipped to the right. (NOTE! this is not explained or shown in the 1st demo video, since i have changed this function after recording it.) The NORMAL DISTORTION (toggle left) results the mighty saturated distortion this circuit is famous for. The right stomp-switch with indicator LED is the DRONE KILL switch, it engages or shuts down the oscillators completely for hands-free operation. The left stomp switch is the TRUE BYPASS with it’s own indicator LED (the LEDs are violet/UV and lime green, order my vary). VOLUME attenuates the global output level (BEWARE: the pedal is VERY loud!). Powered by 9V DC via a ‘boss-style’ 2.1mm DC socket (negative pin inside). Power supply not included. Handmade by GRM for Metsään.

https://metsn.tumblr.com/post/703926314059579393​

#METSÄÄN #dirtydrone #dirtydronedistortion #thismachinekillsfascists #dronesynthesizer #dronepedal #dirtpedal #DirtyDrone #distortion​
#distortionpedal #doomdrones​
#doommetal #dronemetal #doomcore​
#pedal #guitarpedal #fuzz #stompbox #noiseagainstfascism #noisenotmusic​
#fuzzpedal #pedalporn #pedalfetish #pedalboard #pedalcommodity #dirtstomp #stompbox​

Available now.

DIRTY DRONE DISTORTION - Distortion with build in doom drone oscillators

Still need to make a demo video with the NORMAL distortion setting, as the previous one only shows the EXTREME setting. Stay detuned.

This one is for heavy doom drone sounds, no matter if you run your stringed instruments (electric guitar/bass/etc) or a synth through it, the Dirty Drone Distortion will add 10 tons. It is housed in a sturdy aluminum enclosure, hand-painted with ‘industry burnout’ camo patterns in black and silver. The circuit is a modded vintage SUNN MODEL T preamp based distortion with HIGH and LOW control and a build in duo-oscillator DIRTY DRONE section. MIX control blends the DRONES with the pedal’s input before the distortion kicks in. Each oscillator has a TUNE control and a WAVEFORM toggle-switch for TRIANGLE and SQUARE wave selection. The third toggle engages the EXTREME DISTORTION mode when flipped to the right. (NOTE! this is not explained or shown in the 1st demo video, since i have changed this function after recording it.) The NORMAL DISTORTION (toggle left) results the mighty saturated distortion this circuit is famous for. The right stomp-switch with indicator LED is the DRONE KILL switch, it engages or shuts down the oscillators completely for hands-free operation. The left stomp switch is the TRUE BYPASS with it’s own indicator LED (the LEDs are violet/UV and lime green, order my vary). VOLUME attenuates the global output level (BEWARE: the pedal is VERY loud!). Powered by 9V DC via a ‘boss-style’ 2.1mm DC socket (negative pin inside). Power supply not included. Handmade by GRM for Metsään.

https://metsn.tumblr.com/post/703926314059579393

#METSÄÄN #dirtydrone #dirtydronedistortion #thismachinekillsfascists #dronesynthesizer #dronepedal #dirtpedal #DirtyDrone #distortion
#distortionpedal #doomdrones
#doommetal #dronemetal #doomcore
#pedal #guitarpedal #fuzz #stompbox #noiseagainstfascism #noisenotmusic
#fuzzpedal #pedalporn #pedalfetish #pedalboard #pedalcommodity #dirtstomp #stompbox

Available now from #METSÄÄN.

DIRTY DRONE DELUGE - a shadow modulated 4step sequencer with delay/distortion

This machine is named Dirty Drone Deluge, because the sequenzer is flooding the delay for a flood of sounds. It’s enclosure is a recycled drawer (25.5x16.5x9.5cm) of a wooden cabinet, painted in the ‘burnt out industry’ camo patterns in black and chrome. The panel is made of coarsely sanded plastique aluminum laminate with some stamped in function indicator letters.This METSÄÄN machine contains two sections: an extra noisy ECHOBLENDER delay/distortion (more on that in the ECHOBLENDER postings) and an 4-step sequencer. Each step has a FREQUENCY control, a RANGE toggle-switch (low/high) and a LDR (Light Dependent Resistor), that allows frequency control by throwing shade or shining light onto it (shadow=higher/light=lower). A SPEED control sets the sequencers tempo and another toggle-switch kills the sequencers signal to the ECHOBLENDER section. Furthermore there is an INPUT socket (6.3mm mono TS plug) for injecting external signals to the ECHOBLENDER, either passively mixing with the SEQUENZER section’s signal, when that is not switched off. The OUTPUT socket is also for 6.3mm mono TS plugs. Powered by standard 9V DC effect pedal power supplies (boss-style, negative pin inside). PSU is not included. Handmade by grm for METSÄÄN.

https://metsn.tumblr.com/post/703619285934899200

#noisesynth #dronesynth #dronebox #noisebox #dirtydrone #noiseart #soundart #soundobject #soundsculpture #soundbox #thismachinekillsfascists #handmade #sequenzer #delay #distortion #pedalboard #metsään #dirtydrone #soundgenerator #deluge #dirtydronedeluge

Available now from #METSÄÄN.

DIRTY DRONE DELUGE - a shadow modulated 4step sequencer with delay/distortion

This machine is named Dirty Drone Deluge, because the sequenzer is flooding the delay for a flood of sounds. It’s enclosure is a recycled drawer (25.5x16.5x9.5cm) of a wooden cabinet, painted in the ‘burnt out industry’ camo patterns in black and chrome. The panel is made of coarsely sanded plastique aluminum laminate with some stamped in function indicator letters.This METSÄÄN machine contains two sections: an extra noisy ECHOBLENDER delay/distortion (more on that in the ECHOBLENDER postings) and an 4-step sequencer. Each step has a FREQUENCY control, a RANGE toggle-switch (low/high) and a LDR (Light Dependent Resistor), that allows frequency control by throwing shade or shining light onto it (shadow=higher/light=lower). A SPEED control sets the sequencers tempo and another toggle-switch kills the sequencers signal to the ECHOBLENDER section. Furthermore there is an INPUT socket (6.3mm mono TS plug) for injecting external signals to the ECHOBLENDER, either passively mixing with the SEQUENZER section’s signal, when that is not switched off. The OUTPUT socket is also for 6.3mm mono TS plugs. Powered by standard 9V DC effect pedal power supplies (boss-style, negative pin inside). PSU is not included. Handmade by grm for METSÄÄN.

https://metsn.tumblr.com/post/703619285934899200

#noisesynth #dronesynth #dronebox #noisebox #dirtydrone #noiseart #soundart #soundobject #soundsculpture #soundbox #thismachinekillsfascists #handmade #sequenzer #delay #distortion #pedalboard #metsään #dirtydrone #soundgenerator #deluge #dirtydronedeluge

Available soon. Stay detuned.

This machine is named Dirty Drone Deluge, because the sequenzer is flooding the delay for a flood of sounds. It's enclosure is a recycled drawer (25.5x16.5x9.5cm) of a wooden cabinet, painted in the 'burnt out industry' camo patterns in black and chrome. The panel is made of coarsely sanded plastique aluminum laminate with some stamped in function indicator letters.This METSÄÄN machine contains two sections: an extra noisy ECHOBLENDER delay/distortion (more on that in the ECHOBLENDER postings) and an 4-step sequencer. Each step has a FREQUENCY control, a RANGE toggle-switch (low/high) and a LDR (LightDependendResistor), that allows frequency control by throwing shade or shining light onto it (shadow=higher/light=lower). A SPEED control sets the sequencers tempo and another toggle-switch kills the sequencers signal to the ECHOBLENDER section. Furthermore there is an INPUT socket (6.3mm mono TS plug) for injecting external signals to the ECHOBLENDER, either passively mixing with the SEQUENZER section's signal, when that is not switched off. The OUTPUT socket is also for 6.3mm mono TS plugs. Powered by standard 9V DC effect pedal power supplies (boss-style, negative pin inside). PSU is not included.

#noisesynth #dronesynth #dronebox #noisebox #dirtydrone #noiseart #soundart #soundobject #soundsculpture #soundbox #thismachinekillsfascists #handmade #sequenzer #delay #distortion #pedalboard #metsään #dirtydrone #soundgenerator #deluge #dirtydronedeluge

https://youtu.be/2_ovzP2puw8

Available soon. Stay detuned.

The Dirty Drone Deluge is named, because the sequncer is flooding the delay for a flood of sounds. It's enclosure is a recycled drawer (25.5x16.5x9.5cm) of a wooden cabinet, painted in the 'burnt out industry' camo patterns in black and chrome. The panel is made of coarsely sanded plastique aluminum laminate with some stamped in function indicator letters.This METSÄÄN machine contains two sections: an extra noisy ECHOBLENDER delay/distortion (more on that in the ECHOBLENDER postings) and an 4-step sequencer. Each step has a FREQUENCY control, a RANGE toggle-switch (low/high) and a LDR (LightDependendResistor), that allows frequency control by throwing shade or shining light onto it (shadow=higher/light=lower). A SPEED control sets the sequencers tempo and another toggle-switch kills the sequencers signal to the ECHOBLENDER section. Furthermore there is an INPUT socket (6.3mm mono TS plug) for injecting external signals to the ECHOBLENDER, either passively mixing with the SEQUENZER section's signal, when that is not switched off. The OUTPUT socket is also for 6.3mm mono TS plugs. Powered by standard 9V DC effect pedal power supplies (boss-style, negative pin inside). PSU is not included.

#noisesynth #dronesynth #dronebox #noisebox #dirtydrone #noiseart #soundart #soundobject #soundsculpture #soundbox #thismachinekillsfascists #handmade #sequenzer #delay #distortion #pedalboard #metsään #dirtydrone #soundgenerator #deluge #dirtydronedeluge

https://youtu.be/2_ovzP2puw8

Available soon. Stay detuned.

(unable to upload better resolutions, sorry.)

The Dirty Drone Deluge is named, because the sequncer is flooding the delay for a flood of sounds. It's enclosure is a recycled drawer (25.5x16.5x9.5cm) of a wooden cabinet, painted in the 'burnt out industry' camo patterns in black and chrome. The panel is made of coarsely sanded plastique aluminum laminate with some stamped in function indicator letters.This METSÄÄN machine contains two sections: an extra noisy ECHOBLENDER delay/distortion (more on that in the ECHOBLENDER postings) and an 4-step sequencer. Each step has a FREQUENCY control, a RANGE toggle-switch (low/high) and a LDR (LightDependendResistor), that allows frequency control by throwing shade or shining light onto it (shadow=higher/light=lower). A SPEED control sets the sequencers tempo and another toggle-switch kills the sequencers signal to the ECHOBLENDER section. Furthermore there is an INPUT socket (6.3mm mono TS plug) for injecting external signals to the ECHOBLENDER, either passively mixing with the SEQUENZER section's signal, when that is not switched off. The OUTPUT socket is also for 6.3mm mono TS plugs. Powered by standard 9V DC effect pedal power supplies (boss-style, negative pin inside). PSU is not included.

https://youtu.be/2_ovzP2puw8

#noisesynth #dronesynth #dronebox #noisebox #dirtydrone #noiseart #soundart #soundobject #soundsculpture #soundbox #thismachinekillsfascists #handmade #sequenzer #delay #distortion #pedalboard #metsään #dirtydrone #soundgenerator #deluge #dirtydronedeluge

BURNT OUT INDUSTRY CAMO

A new batch of #dirtydronedistortion in the making. Stay setuned.

This one is for heavy doom drone sounds added to your stringed instruments (electric guitar/bass/etc). A sturdy black aluminum enclosure hand-painted with broken hexagon scorced industry camo patterns in matte black and silver is housing a vintage SUNN MODEL T preamp based distortion with HIGH and LOW end booster and a build in duo-oscillator DRONE section. MIX control blends the DRONES with the pedal’s input before the distortion kicks in. Each oscillator has a TUNE control and a WAVEFORM toggle-switch for TRIANGLE and SQUARE wave selection. A third toggle switch adds a very subtle different distortion flavor. A DRONE KILL stomp-switch with UV indicator LED engages or shuts down the oscillators for hands-free operation. VOLUME dials in the global output volume (it’s a loud one!). True bypass with greenish indicator LED. Powered by 9V DC via a ‘boss-style’ 2.1mm DC socket (negative inside). PSU not included. Handmade by GRM for Metsään.

#thismachinekillsfascists #dronesynthesizer #dronepedal #dirtpedal #DirtyDrone #distortion
#distortionpedal #doomdrones
#doommetal #dronemetal #doomcore
#pedal #guitarpedal #fuzz #noiseagainstfascism #noisenotmusic
#fuzzpedal #pedalporn #pedalfetish #pedalcommodity

Testing the new #METSÄÄN MACHINE the first #DirtyDroneDeluge with a light controlled 4 step sequencer running through an #Echoblender delay/distortion section. In this clip the output signal also runs through heavy reverb, the unnatural habitat of it's sound. Each step has individual frequency control and a toggle switch that selects two different ways of how the LDR (light dependent reaistor) affects the pitch of the step. A SPEED control makes it go fast or slow. The sequencer runs on an algorythm, that adds very slight variations to the flow. The machine runs on standard 9V DC pedal power supplies (boss-style, center negative). PSU not included. Abailable soon. DM if interested. Stay detuned.

#noisesynth #dronesynth #dronebox #noisebox #dirtydrone #noiseart #soundart #soundobject #soundsculpture #soundbox #thismachinekillsfascists #handmade

https://www.instagram.com/tv/ClrtdzAAGju

New one off build in the making. 4 step sequencer (appreciator!) with light controlled frequency variations running through an echoblender distortion/delay. This machine is for real dirty oldschool sci-fi junk noise needs. Still have to try it with massive reverberation space clouds.

ignore:
#noisesynth #dronesynth #dronebox #noisebox #dirtydrone #noiseart #soundart #soundobject #soundsculpture #soundbox #thismachinekillsfascists #handmade #synth #syntesizer #analogsynth #experiemntalelectronic #electronicmusic #experimentalmusicinstrument #sounddesign #sounddesigner #cinematicsound

Available now:
#Metsään #DirtyDrone #31 - an unrulyy noise/drone synth

The Dirty Drone #31 is an one-off build, based on a modified Dirty Drone Defrost in a recycled wooden box with a raw, broken hexagon pattern in grey and black. With 2x 6.3mm TS instrument jack output channels and a total of 8 square wave oscillators. The oscillators are configured as 4 pairs. Every pair has a combined pitch control and a offset control. Two 3 position toggle switches, select slight tonal differences. Each output channel has a level control and an optional low-pass setting. The left channel is more linear and drone-y and the right channel is more textured and can create primitive repeating patterns. Powered by 12V DC (2.1mm, center positive barrel connector), comes with a recycled euro-style mains power supply. Size: 14 x 13 x 7 cm (including knobs). Handmade by grm for METSÄÄN.

Available here: https://metsn.tumblr.com/post/702100932040736768

Uploaded a new demo, the machine will be available soon. Stay detuned.

The Dirty Drone #31 is an one-off build, based on a modified Dirty Drone Defrost. With 2 output channels and a total of 8 square wave oscillators. The oscillators are configured as 4 pairs. Every pair has a combined pitch control and a offset control. Two 3 position toggle switches, select slight tonal differences. Each output channel has a level control and an optional low-pass setting. The left channel is more linear and drone-y and the right channel is more textured and can create primitive repeating patterns. Handmade by grm for #METSÄÄN.

#DirtyDrone #thismachinekillsfascists

https://metsn.tumblr.com/

https://youtu.be/-Fpt34DCHus