Got a #Creality Sprite direct drive extruder for my #Ender 3 v2. Fantastic if costly upgrade, compared to the base price of the printer. But! There's a little cable you have to plug in and it IS NOT in the instructions. There's an enigmatic little sticker on the cable that points you in the right direction so maybe you can avoid my hours of hapless troubleshooting. #3Dprinting

Je prévois de me séparer de ma première imprimante 3D, une Ender 3 Pro achetée fin 2019. Pas mal de modifs dessus : extrudeur, bloc de chauffe, plateau borosilicate, ressorts de réglage du plateau, carte mère. J'ai gardé toutes les anciennes pièces, et il y a un peu de matos neuf (buses, second bloc de chauffe, ressorts, etc).
Sur Toulouse ou sa région.
Contactez-moi en MD si vous êtes intéressé(e).
#ender #impression3d

Finally moved from an up mini 2 to an #Ender (3 s1 pro) and I never noticed how loud the former was, I have to look at mine to make sure it is printing, because it is almost always (save for the fan) dead silent.

Also glad to have auto leveling

Kotaku: Don’t Feel Guilty Over Save Scumming In Baldur’s Gate 3 https://kotaku.com/baldurs-gate-3-bg3-save-scum-scumming-dnd-1850748727 #gaming #tech #kotaku #forgottenrealmsadventures #tabletoproleplayinggame #dungeonsdragons #tabletopgames #tabletopgame #baldursgate #videogame #sports #ender

A jo, tiskne to. 😁 #3Dprint #Ender

Nastal čas na novou 3D tiskárnu, uvažuji o Creality Ender 3 v2, nějaké doporučení z pléna? Nepohrdnu radou od tiskařů. Díky. #3Dprint #Ender

エンリリが半額セールですってよ〜〜！！！
https://twitter.com/BinaryHaze_JP/status/1670958363407192065?t=BHz4TFjd2NIBGzHstmyFFA&s=19
#enderlilies
#ender lilies

https://furaffinity.net/user/HolyDevil has been abducted for observation
.
.
.

#furryart #holydevil #abducted #tank #enderman #grass block #ender crystal

Imprimiendo un catálogo de colores para referencia rápida 😉 #impresion3D #3dprint #ender #ender3S1

I had issues with my Ender-3 and I just couldn't figure it out.

Was it the new heatbreak, or the nozzle. Maybe there was a clog somewhere in the line?

After hours troubleshooting I figured it out. It was the e-steps.

I had also replaced the plastic extruder bit with a metal one. And I had forgotten to recalibrate the e-steps.

Test Benchy is printing now, and even in the first couple of layers I notice the difference.

Always calibrate after physical changes!

#3DPrinting #Ender #Creality

Just set up my #Creality #Ender 5 S1 with their Sonic Pad and while the setup wizard is super simple, it would fail auto leveling every time. Spectacularly in fact- the head would move too far to the left where the cr touch was off the bed but the nozzle wasn't, this flexed the bed and caused an error, but also caused the Z motor to release resulting in a loud screaming sound!! The fix was to edit x_offset in printer.cfg to -10, but OMG how did the firmware get out the door like this?? #klipper

J’utilise plusieurs #imprimantes 3D, dont la Creality 3D #Ender 3 S1. Tenté par l’impression en #ABS, je n’avais pas encore franchi l Le caisson est la solution qui vient à l’esprit. Un tour sur un moteur de recherche avec « #caisson #ender3 français » renvoie plusieurs solutions. J’ai retenu Accante
Si vous voulez en savoir plus l'article est sur le blog :
https://www.framboise314.fr/caisson-transparent-pour-imprimantes-3d-creality-ender-3-s1-et-s1-pro-par-accante/

The #Ender #3dprinter upgrades I would do immediately would be get rid of those stupid bed leveling wheels & setup. That is rediculous. I'd want something more permanent. The "warped" heating bed would also have to go for something of better quality. Also, "binder clips" are stupid. I'd have to go magnetic. Also, auto bed leveling with a BLTouch or whatever fancy is out there would be a must.

I was still impressed with the print quality I achieved w/o going on forever leveling the bed.

@snagburz, what were they about? Or they are just a #community than bans certain stuff. It's like #3dprinting on #reddit banning anything related to an #ender 3.

#creality #CR-10 Smart Pro.

I don't know, but currently, my #CR6SE is my daily driver, and it is working for me.

My only complaint is that the force sensor is sometimes just too weird to work with and sensitive to stupid external factors.

However, the auto-bed-leveling is so convenient, and I haven't had any of the manual-bed-leveling struggles that many beginners have with the #ender series.

The force sensor also makes it more difficult to mod the printer. Not allowing me to #3dprint most #opensource mods, because they are made for the #bltouch and #crtouch.

Finally, the speed is getting to me, and I would love to get a faster printer. But the price of a #voron is a bit too high and I don't have the time for it.

I really wish both #creality and #prusa brought out their own #corexy printers, rather than continuing down this path of #bedslingers and #cartesian printers.

Opinions? Would you get a non core xy today?

@3dprinting #3dprinting

https://youtu.be/FRFdd2mXylg

tuzi.gcode

Hopefully the first of many. Got the Ender 2 Pro as my first 3D printer and this print came out fine with just minimal changes to the stock config.

Hoping to learn more about 3d printing and design especially using a free and open source stack (FreeCAD, Cura, and others).

#maker #tuzi #ender #creality #ender2pro #3dprinting #freecad #cura #design

@TreasureDev never heard of this. Will check it out. I have to say, my recent experience with the #cr6se and the force sensor it uses is driving em crazy. Also, it makes it more difficult to build custom heads for your #3dprinter, something which is very easy with an #ender and #bltouch.

I'm no electrical engineer but I think I know why my 3d printer isn't heating 😅

#3dprinter #creality #ender

This feels like the alchemy equivalent of human transmutation, but! I figured a DUPLO block would be a good test if print quality and tolerances. And I am pretty happy with it!

#3Dprinting #Creality #Ender #Ender3 #Ender3v2 #LEGO #DUPLO

My Ender 3 S1 blobbed up so bad last night that it killed the hotend. Filled up everything with liquid hot plastic then hardened.

Inside threads, locking screws tight and caused the wires to get caught up and torn out.

New upgraded extruder is on the way. What a mess

#3DPrinting #creality #ender #marimoko #blob #bigmess #david-HASSLE-hoff