Ooh, check out the butt on that... dildo. Another bit of awesome butt art on a Teanga-Aingidh... the one with the teeth.

This is another run of the previously posted version with white teeth. Unfortunately the previous pour had a flaw in the base so it has gone into the "flops and tests" bucket.

#AdultToys #Silicone #SiliconeArt #ButtArt #FantasyToys

Yesterday's Teanga-Aingidh pour came out perfect, complete with snarling teeth just from a trip to the dentist.

#AdultToys #SiliconeArt #FantasyToys

Today's pour is in Asexual Pride flag colours in a Teanga-Aingidh... you know the one with a big tongue and wild teeth! Our client requested to have the teeth in white, so we thought that it sounded reasonable and gave it a go. Not sure how this will turn out, but we are definitely looking forward to the result. We don't usually do these types of custom pours as they add a layer of complexity, but in this case we wanted to see how it looked also. 👀

#AdultToys #SiliconeArt #FantasyToys

#sale still running for a couple hours! Still got some stragglers left on the shelf.

#dildos #fantasytoys #fantasydildo

Pouring a Base Seagsaidh® Greimiche dildo in our Royal Palace colour combination.

The video shows us pouring using a split cup that separates out the colours into separate chambers so they maintain that separation into the toy itself. This can be done to an extent in a single non-split cup if you know what you are doing, but generally you will get a mixing of the colours using a standard cup as the silicone pours out. Typically this would create a fade/blend of the colours as they mix.

This also depends on the firmness of the silicone. Generally the firmer you go, more distinction between the colours occurs. The silicone used on this pour is what is known as a 00-50 (shore) which is our 'Just Right' or medium firmness. Our softess silicone is currently 00-30 (shore) which is really running compared to the 00-50 or our firmer 10a (shore).

#adulttoys #fantasytoys #siliconeart #silicone #sextoys #adulttoyshop #smallbusiness

The test pour of the Seòd was a success. Looking pretty good in the Deep Sea Adventure colour combination. We just need to finish the larger size before the model is listed in the store.

#fantasytoys #adulttoys #adulttoyshop #siliconeart #silicone

Test pour of the new Seòd mold in progress. This colour in our range is called Deep Sea Adventure.

#fantasytoys #adulttoys #siliconeart #silicone #manufacturingprocess

All poured now. Made up exactly the right amount of silicone to fill the mold shell. Not a typical outcome. Now just need to wait for it to cure, which we usually wait for a good 24hrs before demolding, although the normal demolding time is 4hrs for this type of silicone.

I will post a short pour video later.

#fantasytoys #adulttoys #siliconeart #smallbusiness #independentbusiness #silicone #manufacturingprocess

Mold making day. Hoping for the best.

#fantasytoys #adulttoys #siliconeart #moldmaking #smallbusiness #independentbusiness

Getting ready to make the first mold of our soon to be released silicone grinder called 'Seòd' which in English means 'Jewel, Hero, Warrior'.

Once the mold is created we will then move on to the test pour to confirm that the mold is good and ready for production use.

This grinder is roughly the size of an adult's average hand, designed to fit in the palm of a user's hand and then used to smush against anything that it makes feel good. We will also have a larger model that is still being processed.

#fantasytoys #adulttoys #siliconeart #silicone #siliconegrinder #smallbusiness #independentbusiness #manufacturingprocess

Recently working on new models to discover that you shouldn't use blended filament for 3D printing when you will be doing a primer coat.

In this picture the larger models were printed using a high quality filament and then spray with a plastic primer from Rust-o-leum. The fact that the green colour shows through is not because the primer coat was too thin. What actually happened was that the colour of the filament leeched through the primer. These had three coats and every one of them continued to leech the colour which ultimately would lead to cure inhibition.

The larger models were trashed and new prints had to be made from scratch, starting the entire process again.

Ignore the items in the background, they will be featured in other posts in the future.

#fantasytoys #adulttoys #siliconetoys #sextoys

Go buy @blackfanglabs@twitter.com toys!

They made a cube buttplug. How can you possibly go wrong.

RT @blackfanglabs@twitter.com

We're launching this years Winter-#Sale!

For the next 2 weeks, you get 15% off all our inventory and custom toys!

Check it out here: https://blackfanglabs.net

#BlackFriday #blackfridaysale #CyberMonday #sextoys #fantasytoys

🐦🔗: https://twitter.com/blackfanglabs/status/1595347855178403840

This is pouring a Base Seagsaidh® Tarrachail in Candy Corn colour combination. Here we are using a split cup (a cup with multiple chambers) to mix the colours during the pour itself. This helps to maintain the separation of the colours, creating a marbled effect in the silicone.

The Tarrachail is a knotting toy that is not too long above the knot, which makes it is easier to knot without issues around the depth of the shaft. It also has a good length below the knot which helps to maintain the 'plugged' feeling.

The flared base on the toy also means that it is suitable for anal play and using with a harness.

#fantasytoys #adulttoys #siliconeart #adulttoyshop #dildo

This pour was one of our Greimiche toys in a Tulips colour combination. One of our Signature Colour Combinations.

Depending on the firmness the customer selects, the cure time will range from 3hrs to 8hrs but generally they will be left overnight to fully cure before we demold them.

So the video shows the pour after we have made up the silicone in the individual colours that are required. These are then combined into a single mixing tub prior to pouring into the mold. After curing we demold it, wash it and then let it sit for a further 24hrs before trimming, another wash and finally packing.

Also, testing out video quality and size for Mastodon to ensure that it doesn't blow the storage on the server, but still has good quality for viewing. Let us know if there are any issues with the quality. This was rendered in 720p and medium quality settings making a 31mb file.

#fantasytoys #adulttoys #sextoys #siliconeart #tentacles

We're launching this years Winter-#Sale!

For the next 2 weeks, you get 15% off all our inventory and custom toys!

Check it out here: https://blackfanglabs.net

Sale running until December the 7th

#BlackFriday #blackfridaysale #CyberMonday #sextoys #fantasytoys

This is the Base Seagsaidh® Balg, with its big puffed out upper shaft, nice upward curve along the top and a pronounced head. Definitely one for the greedy user. Not to mention a harness compatible base for an awesome strap-on experience. This particular pour is the Fruity Chews colour combination, a mix of yellow, blue and purple.

#fantasytoys #adulttoys #siliconeart #silicone #dildo