aaaaaand it continues. #Octopi hung partway through the temp tower for the new filament. (Very strange, completely gone. It even dropped off wifi, using an external dongle.)

One more try. All I want for today is to print a few #HSW accessories for these tools on my desk, and a test print of my #esphome speaker. 12 hours or so total. Not that much to ask I think.

So far the newest, shortened, PTFE tube seems to be ok. ("Seems to be" because I've only had 2 or 3 load cycles on it with one type of filament.) And #Hatchbox is always the expected size from end to end, so hopefully no more PTFE jams. 🤞

related: https://www.printables.com/model/152592-honeycomb-storage-wall/

#prusa #pla #octoprint #octipi #honeycombstoragewall #esphome #homeassistant
@3dprinting

@Stark9837 @3dprinting Me too. I don't like the original #HoneycombStorageWall press-fit concept. I print with larger nozzles, layer heights and speeds and this frequently caused the original to not fit at all. My #Screwiverse inserts snap into place, lock extremely tightly when something is screwed in, and are just as easily to remove. The #Screwiverse with all its attachments is my first real project with #PythonSDF and I'm really happy how well it works for designing.

https://gitlab.com/nobodyinperson/hsw-screwiverse

@nobodyinperson

I also still need to mount the sensor you see hanging there. That is my enclosure temperature sensor, and the #HoneycombStorageWall replaced its original mount. But I am still working on a design.

@3dprinting #3dprinting

@Stark9837 @3dprinting I like the small #HoneycombStorageWall you have there 😉

I split all the #HoneycombStorageWall #Screwiverse parts into separate models on #Printables :

https://www.printables.com/model/470787-hsw-screwiverse/remixes

It was getting too much different stuff for a single page. I also have the feeling that discoverability on Printables is not great when you put everything into one project.

Now that's what I expect of a customizable, modular tool wall 😎

https://www.printables.com/model/470787-hsw-screwiverse

#HoneycombStorageWall #HSW #3dprinting #3dDesign #3dmodelling #pythonSDF #Printables

Yay, 🐙 tentacle-shaped hooks for the #HoneycombStorageWall #Screwiverse 🥳

Wicked strong. You don't need metal screws at all for the #HSW. My Tesa Powerstrips wall brackets and threaded inserts are strong enough (for me at least).

https://www.printables.com/model/470787-hsw-screwiverse

@stepheneb 0.4mm clearance around the thread (in both directions!) is surely a lot, but better more clearance than not enough. Nothing's more frustrating than too small clearances. And people's printers, print settings and materials vary, so I keep the clearances relatively high.

the screw should work very well though in the #HoneycombStorageWall when screwed into one of my threaded inserts: https://www.printables.com/model/470787-hsw-screwiverse/files

These are now the new standard in my #Screwiverse addon for the #HoneycombStorageWall :

https://www.printables.com/model/470787-hsw-screwiverse

#HSW #3dprinting

I'm really getting the hang of #pythonSDF and use it also for more complicated designs now. This is an attempt for a #HoneycombStorageWall insert that expands when a screw is screwed in. This is useful because otherwise it's a press-fit where the clearances need to be tuned-in.

I am (ab)using @OpenSCAD as an #STL viewer here 😛 It does it great! Would be awesome if it could open STL files natively from the file browser.

#HoneycombStorageWall on the back of an #IKEA PAX door 😎 I will put stuff I need for #3Dprinting with my #PrusaMINI there.

Mounted with my Tesa Powerstrips bracket: https://www.printables.com/de/model/464973-hsw-tesa-powerstrips-wall-mount

I made a design to non-destructively attach your #HoneycombStorageWall to a flat wall with Tesa Powerstrips:

https://www.printables.com/de/model/464973-hsw-tesa-powerstrips-wall-mount

#HSW #3dprinting #pythonSDF