I chose #Raspbian OS lite to get a fresh, fast, and clean #RadpberryPi. It was not only recommended, but I wanted to use #KIAUH ratger than using #MainsailOS.

This gave me more storage space, and I also knew what was already installed.

This also solved one of my problems when I used #Klipper with #Octoprint and #OctoKlipper.

I had a "mcu error," which I never could get a solution for. I had to restart my printer and Klipper repeatedly until they finally would connect.

This was solved by following the #Mainsail and #KIAUH docs and installing the Raspberry Pi MCU firmware.

These problems are now solved.

And damn, is this blazing fast.

Although I did clean my fan and heatsink and decided to #overclock my Raspberry Pi, the UI is so responsive I can live without my printer screen.

@3dprinting #3dprinting

@geekandi

I actually installed #Klipper and #OctoKlipper today after running #Marlin for 3 years now.

I wanted the macros that came with Klipper, so I am excited to write my own color change macros now. Currently, all my scripts are in #PrusaSlicer in the custom #Gcode inputs.

So I have my work cut out for me.

@RobeeShepherd

@3dprinting #3dprinting

@stooovie

I doubled the slicing resolution and halved the minimum maximum path length to prove a point. That printers can be overwhelmed at normal speeds of 60 mm/s with excessive G1 movements.

Default settings in #PrusaSlicer can do this to a #benchy with some cheaper 8-bit boards or over slower serial connections using something like #Octoprint

Not only does #Klipper have its own methods of being faster, but #Mainsail and #Fluidd have less oerhead than #Octoprint. So, just the serial communication can be more efficient due to this.

I am busy with my own personal investigation into #Octoprint to see how I can speed it up because I need it and don't have the time to rewrite my entiee enclosure to work without my plugins. So Mainsail isn't an option.

I actually installed #Klipper and #Octoklipper literally like 6 hours ago. I am still busy with mt config because I had some unrelated issues.

@3dprinting #3dprinting