S dospělými kočkami není malých hobby projektů. Tohle je asi 1/4 potřebných výtisků a 1/2 budoucích uživatelů. Jen by to už chtělo dokonstruovat i podstavu.

PS: Zda i tohle uvolním ke stažení, uvidím až podle výsledku. Držte palec.

⭕ #3Dtisk #Kimya #PETG

So schwer sind die Kürzel #PLA und #PETG nicht zu unterscheiden, und trotzdem merke ich erst beim zweiten Spaghetti-Druck, dass ich das falsche Filament bzw. die falschen Temperaturen verwende... Grrrrr.... #ender3v2 #3ddruck

First time #3d printing #PETG - straight out of the dehydrator. Used glue stick on the bed to hopefully prevent it sticking too well.

First few layers of the temp tower looked okay. Let's see how it goes.

Settings/tricks involved: #firstlayer is printing at an undemanding 15mm/s, the temperature is a balmy 240c with an 90c bed temp, which will ramp down to 235/80 for the remainder of the print. The hotbed is spring-steel, with four coats of VO5's "Firm Hold" hair spray, for a lustrous shine and bounce. The printer is an Ender 3v2, and tonight is wearing a beautiful Biqu H2S Revo with a 0.6mm nozzle. Her filament is #petg by X3D. Doesn't she look stunning! #3dprinting #prusaslicer #ender3

So I have started a #3dprint, in #petg: a filament I lovingly refer to "Satan's own thermopolymer", which I guess is produced by extrusion through the 1.75mm orifice of Beelzebub's penis with +/- 0.1mm tolerance. However, and I dread saying this: it actually appears to be adhering to the build plate and not to the nozzle, which is the normal outcome. Still, the first layer is only about 50% complete so it could still disappoint me like I continually disappoint my father. #3dprinting #devilment

#3dprinting of Stitch printed with organic tree supports in PETG Grey. Still need to airbrush and paint this one :) #3dprint #petg

#3dprint of a YARNBALL for knitting. Did that for a friend. #3dprinting #squidward #spongebob #knitting #yarnball #art #petg #bambulabx1 #BambuLab

Switching to a reel of #PETG for my day to day #3DPrinting - wish me luck! :)

My very first PETG print! Poor bed adhesion in the first attempt, but luckily failed within 5 minutes. Second one fits perfectly to the hose.

This is a kitchen faucet to hose adapter for my sister (for a kiddie pool without ice cold water). Can't test the faucet end myself, so hopefully it matches their faucet.

Model link: https://www.printables.com/model/103407-moen-pull-down-faucet-to-garden-hose-adapter

#3dprinting #3dprint #petg

The good news is that isopropyl alcohol can get epoxy to release from #petg. #3dprinting

@philpem

I'm in Norway and I would love to know too!

@johan_m_o

Do you have any recommendations for PETG?

We tried Easy Creator Easyprint and it is SO frustrating! Stringing and loosening from the bed, even with glue on the bed!

#3dprinting #PETG

27 часов, 49 минут и цветочный горшок готов. Первая большая и простая модель пластиком PETG. Волосит, нужно ещё экспериментировать с настройками.

Пожалел времени, сделал заполнение всего 10%. Оказалось маловато - если давить пальцами на стенку с обеих сторон, то можно прожать :(

Итоговый вес: 242 гр.

Исходная модель: https://www.thingiverse.com/thing:2806583

#3dprint #petg #pot

Made plant markers for the garden. Printed them in #PETG. No idea how these are going to hold up…I’m not expecting much. I don’t have the setup or the materials for ABS but if I like these maybe that’s where I’ll go next.

@3dprinting #3Dprinting #Gardening

Ich bin über das #klickfast system von Peter Jones gestolpert was eine geniale Erfindung ist. Und wie bei allen tollen Erfindungen gibt es 3d Druck-Dateien die es sogar noch verbessern. Hab den für mich idealen Druckstoff gefunden, #petg #hamradio (jaja, es wird auch noch ne Version in Schwarz geben)

my first successful print with PETG is also the best first layer I ever got 😍
#firstLayerPorn #petg #3dprinting #ender3pro

Arschrakete 2.0 für Schlüssel, kleinere Gegenstände und verstecktem Airtag.
Aus #PETG gedruckt, alles in allem verstärkt und kleinere Überhänge. So sollte sie den Vibrationen beim #Graveln besser stand halten.
#3dprint #crappycrafts

I may have been a bit ambitious in my overhangs, and insufficiently careful in my retraction settings #petg #3dprint

I don't have any cats (yet), but my project of trying to raise a bird freely is underway. I'm printing a birdhouse to see if any will come to live in it.

#3dprinting #diy #ender3v2 #petg #bird #cat #birdhouse #pet

https://www.youtube.com/live/KvkMNCJJ-C4?feature=share

@bonfim para petg, eu diria que a configuração agora ficou perfeita. Quase sem strings (teias). #petg #strings #3dprinting

Se a impressão dessas bases não der certo, pelo menos produzi uma teia de aranha 🕸️, que não servirá para nada 😂. Li que essas teias (strings) são normais para o #filamento #petg, mas tem como melhorar um pouco principalmente mexendo nos recuos e na velocidade de transição entre os objetos. Essa será a minha próxima batalha, pois eu realmente gostei do material de comparado ao PLA para algumas utilidades que precisa de mais peso e força. #3dprinting