Yesterday evening I was able to get AIS working over the WiFi, it basically reads #NMEA0183 data via UART and sends them via UDP to server. Now I need to do some power source as it need to be powered by boat 12V power system. Here is dAISy HAT at the top of ESP32 One, few HW hacks required and Serial2 configuration of HAT had to be enabled, but it works! #Boating #SignalK #SensESP

#SmartGauge has been tested on the water! Everything works just fine, even the alarms are working, a friend of mine is very happy with it. #SignalK #SensESP #AvaloniaUI #RaspberryPi

My boat is currently out of the water as we have winter season here. My boat system doesn't have a winter break, it's guarding my boat 24/7, sending all the telemetry to my server. My server keeps me posted about any issues. The purple device in the picture is SH-ESP32 with Engine HAT by @mairas. This little guy is measuring temperatures, reading engine RPM and reading batteries' voltage (very important). #Boating #SignalK #SensESP #esp32 @sunseeker27

Finally, I was able to get my environment sensor installed on the boat. It's #M5stack Atom with BME280 and SHT40 sensors. It's sending data (temperature, humidity and atmospheric pressure) into #SignalK server. #Boating #Fun #IoT #ESP32 #SensESP