I need to get an 18in cut-and-hold pruner to carry on the #cargoBike for the blackberry vines around SW #Portland @ShawneMartinez do I need to cut down a 3ft one? 🩸 #Tigard

https://twitter.com/enobacon/status/1668887873716879362

#bikeBus #SchoolStreets #SafeRoutesToSchool #pdxBikes #Tigard

Local #Portland news: after 20 years in #MultnomahVillage, the Sip d'Vine #wineshop has moved to old downtown #Tigard. Today is their first day open in the new place and we stopped in for a glass of wine and to check it out. If you're not familiar with the shop, Sip d'Vine sells Pacific Northwest wine exclusively, and has a great selection. Go check them out!

Sip d'Vine
12200 SW Main Street
Tigard, OR 97223
503.977.WINE (9463)

Local #Poryland news: Sip d'Vine, the #WineShop that was in #MultnomahVillage, has moved to old downtown #Tigard. Today is their first day open in their new digs and we popped over for a glass and to look the place over. Jill has some unpacking to do -- she was in Multnomah Village for 20 years -- and the tables and chairs are out, the #Wine is in racks. This shop only sells wines from the #PacificNorthwest and they are excellent!

Sip d'Vine
12200 SW Main St
Tigard, OR 97223
503.977.WINE (9463)

@MobilityMike Would love to see this connected to the path that goes through Lowe's and Walmart. Could continue to the path through Auto Zone which is basically the proposed Red Rock Creek Trail. #Tigard #MUP #RedRockCreekTrail
https://www.tigard-or.gov/your-government/departments/community-development/planning/projects/red-rock-creek-trail

@ShawneMartinez unanimous though 💯 @parkingreform #Tigard @TheWarOnCars

Drooling over this potential bike/ped bridge over 217 in #Tigard #WalkRollInfrastructure #MUP #ActiveMobility #FewerCars

I am not sure what to do with this exactly but because Mastodon gives me enough space that I can go beyond just sharing a link to a new blog post, I want to make use of that.

The TL;DR is:

I wanted to learn how to program an #atmega328p using existing gear I had on hand rather than buying a programmer. It can be done with a #Tigard but I couldn't find all of the information I needed to do so in one convenient location, so this blog post is the information that I needed pulled together.

If you have a #woprsummit 0x01 badge and you're not sure how to program it, there might be some useful information in there for you. Maybe you can use it as a basis for figuring out how to do it with another device.

Maybe you've got a different #avr microcontroller but you're not sure how to program it.

The basic steps are:

1. Set correct target board in #Arduino IDE
2. Export compiled code from Arduino
3. Wire Tigard JTAG header to target board’s ISP header according to the diagrams
4. Select JTAG on Tigard mode switch
5. Select desired voltage on Tigard
6. Plug in Tigard via USB-C
7. Set fuses - avrdude -C +tigard.conf -c tigard -p atmega328p -U lfuse:w:0xFF:m -U hfuse:w:0xDA:m -U efuse:w:0x05:m -> Note different fuses may be needed depending on device config
8. Upload code - avrdude -C +tigard.conf -c tigard -p atmega328p -U flash:w:/path/to/firmware.ino.with_bootloader.standard.hex

There's also some bonus info in there about integrating the Tigard with Arduino IDE.

The Tigard was designed (at least in part) by @securelyfitz

I believe the WOPR Summit badge was designed by @dntlookbehindu and @kismetwireless .... at the very least they're the ones that were helping out on Discord with questions.

You can learn more about WOPR Summit here: https://www.woprsummit.org

#HardwareHacking
#HardwareHackers
#BadgeLife

RT @th1an1@twitter.com

Angry protests erupted in the city of #Tigard after #Oregon cops shot and killed a 26-year-old man having a mental health crisis.
Against police brutality.
#RIPower Jacob Ryan McDuff.

🐦🔗: https://twitter.com/th1an1/status/1347521346872504321

RT @joycinemapub
Tonight for WEIRD WEDNESDAY REMOTE, board-certified actor Marjoe Gortner chews up the scenery in STARCRASH! Show starts at 9:15 Pacific. You’re welcome. #StarWars #Marjoe #scifi #Hasselhof #Tigard